Silver solderProperty advantages

1. Description of physical properties:Silver solderIt is a deep welding rod made of silver or silver-based solid, with excellent process performance, low melting point, good wettability, ability to fill gaps, strength, plasticity, conductivity, and good corrosion resistance. It can be used for welding all black and non-ferrous metals except aluminum, magnesium, and other low melting point metals.

2. Characteristic advantages: Silver welding rods have good fluidity, low cost, and excellent process performance.

2. The melting point, wettability, and gap-filling ability of silver are not high.

The strength, plasticity, conductivity, and corrosion resistance of silver welding rods are all very good.

Brazing copper and silver has weldability; solder cannot be used. It is suitable for contact welding, gas flame welding, high-frequency brazing, and some furnace soldering. Brazing has strong strength and good conductivity.

The cost of the welding rod is low; it is suitable for welding copper and copper alloys.

　　Silver solderApplication fields

Widely used in industrial manufacturing fields such as refrigeration, lighting, hardware electrical appliances, instruments, chemical industry, aerospace, etc.

Selection of silver solder grades

Current national quality standards take a certain silverware welding rod as a reference standard: 1. Silverware, copper, phosphorus, environmental solder (silver-copper, phosphorus solder) grades and performance

HAG-2B 2% is equivalent to the American standard AWS BCuP-6, national standard BCu91PAg and L209. It has good fluidity and charging ability and is widely used in air conditioning, refrigerators, machinery and other industries for brazing copper and copper alloys. Melting point: 645-790 degrees Celsius.

HAG-5B contains 5%, equivalent to the American standard AWS BCuP-3 national standard BCu88PAg and L205. It has plasticity suitable for welding loosely fitted copper and alloy joints. Melting point: 645-815 degrees Celsius.

HAG-15B contains 15%, equivalent to the American standard AWS BCuP-5 national standard BCu80AgP and L204. The connector has good plasticity and improved conductivity, especially suitable for uneven spacing situations. It can carry oscillating loads at the interfaces of copper and alloy materials. Melting point: 645-800 degrees Celsius.

Frequently usedSilver solderComparison table: HYAg-50B is used in electric welding rods (silver solder wire, silver solder layer), melting temperature: 690-771; applied in smart electronics, food categories and materials that bear oscillating loads.

HYAg-47B electric welding rod (silver solder wire, silver solder layer) melting temperature: 662-760; comprehensive performance is good with good toughness, permeability coefficient, and elongation rate. Frequently applied in electromechanical parts that require high surface polishing.

HYAg-45B is an electric welding rod (silver solder wire, silver solder layer) melting temperature: 645-690; processability enhanced; interfaces that can bear oscillating loads are widely applicable silver materials. HYAg-40B is used in electric welding rods (silver solder wire, silver solder layer) melting temperature: 600-630; low melting point with good production process; more suitable for quenching steel and thin parts brazing.

HYAg-35B is used in electric welding rods (silver solder wire, silver solder layer) melting temperature: 607-702; applied in heat exchanger electric welding.